Property | Specification Requirement | Test Method | Typical Value |
---|---|---|---|
Longitudinal change | -10%~10% | ASTM D2671 | Pass |
Concentricity | ≥70% | ASTM D2671 | ≥70% |
Tensile strength | ≥10.3Mpa | ASTM D2671 | ≥10.3Mpa |
Volume resistivity | ≥1015Ω•cm | ASTM D2671 | ≥1015Ω•cm |
Dielectric strength | ≥39.37kV/mm | ASTM D2671 | ≥40kV/mm |
Elongation at break | ≥120% | ASTM D2671 | ≥140% |
Heat shock | No cracking | ASTM D2671 (180˚C/4 hrs) |
No cracking |
Low temperature flexibility | No cracking | ASTM D2671 (-55˚C/4 hrs) |
No cracking |
Excellent electrical insulation properties | |||
No heavy metals contained | |||
Compatibility with gamma rays and ETO sterilization |
Part Number | As supplied (mm) |
After recovered (mm) |
Standard Length (Meter) |
||
---|---|---|---|---|---|
I.D. (min) |
W.T. | I.D. (max) |
W.T. | ||
MTE-0012 | 1.2 | 0.20±0.05 | 0.6 | 0.43±0.08 | 200 |
MTE-0016 | 1.6 | 0.20±0.05 | 0.8 | 0.43±0.08 | 200 |
MTE-0024 | 2.4 | 0.25±0.05 | 1.2 | 0.51±0.08 | 200 |
MTE-0032 | 3.2 | 0.25±0.05 | 1.6 | 0.51±0.08 | 200 |
MTE-0048 | 4.8 | 0.25±0.05 | 2.4 | 0.51±0.08 | 100 |
MTE-0064 | 6.4 | 0.30±0.05 | 3.2 | 0.64±0.08 | 100 |
MTE-0095 | 9.5 | 0.30±0.05 | 4.8 | 0.64±0.08 | 50 |
MTE-0127 | 12.7 | 0.30±0.05 | 6.4 | 0.64±0.08 | 50 |
MTE-0191 | 19.1 | 0.35±0.05 | 9.5 | 0.76±0.08 | 50 |
MTE-0254 | 25.4 | 0.45±0.05 | 12.7 | 0.89±0.08 | 50 |